Mount The Oven - GE JVM1500 Series Installation Instructions Manual

B6

MOUNT THE OVEN

FOR EASIER INSTALLATION AND PERSONAL
SAFETY, WE RECOMMEND THAT TWO PEOPLE
INSTALL THIS OVEN.
IMPORTANT: Do not grip or use handle
during installation.
NOTE: If your cabinet is metal, use the nylon
grommet around the power cord hole to prevent
cutting of the cord.
NOTE: We recommend using filler blocks if the
cabinet front hangs below the cabinet bottom shelf.
IMPORTANT: If filler blocks are not used,
case damage may occur from over tightening
screws.
NOTE: When mounting
the oven, thread power
cord through hole in
bottom of top cabinet.
Keep it tight throughout
Steps 1–3. Do not pinch
cord or lift oven by
pulling cord.
Rotate front of
2
oven up against
cabinet bottom.
Installation Instructions
Lift oven, tilt it
1
forward and
hook slots at back
bottom edge onto
two lower tabs of
mounting plate.
18
Cabinet Front
Cabinet Bottom Shelf
Oven Top
Attach the oven to the top cabinet by inserting
3
2 self-aligning screws through outer top cabinet
holes. Turn two full turns on each screw. Be sure
to keep power cord tight. Be careful not to pinch
the cord, especially when mounting flush to
bottom of cabinet.
Tighten the two screws to the top of the oven
4
completely. (While tightening screws, hold the
oven in place against the wall and the top
cabinet.)
Install grease filters. See the Owner's Manual
5
packed with the oven.
Filler Block
Equivalent
to depth of
cabinet recess
Self-Aligning Screw