WMF 1500S User Manual page 77

™ Remove coffee grounds residue using a paint-brush
or scrubber
™ Rinse the brewing unit under running water
potential damage
• The brewing unit can be damaged by
cleaning agent or in a dishwasher
> Use only water to clean the brewing unit.
> Never clean the brewing unit in the
dishwasher.
™ Dry the brewing unit with a cloth
Allow to dry completely before reinstalling in the
coffee machine.
Remove coffee grounds residue from the chute.
™ Wipe out the coffee grounds forward or suck out
using a vacuum cleaner
™ Replace springs in insertion chute (illustration 5)
™ Squeeze the funnel [1]
Use the guides.
Refit the brewing unit after it has been dried.
™ Hold the retaining catch compressed and replace
the brewing unit in the chute against rear cover
™ Push the brewing unit upwards until it engages in
the retaining catch
™ Insert the grounds container
™ Replace drip tray
If the brewing unit cannot be inserted without
resistance:
> Turn the thread on the brewing unit head
slightly to the left or right with the multitool
until the brewing unit slides into the guide.
> Never use force. Danger of breakage.
User Manual WMF 1500 S
slightly and re-insert it
Care | Manual cleaning
iMportant
Observe the Warranty chapter
w starting on page 99
Illustration 5
Brewing sieve
iMportant
Observe the Warranty chapter
w starting on page 99
1
77