WMF 1500S User Manual page 101

Hide thumbs Also See for 1500S:
Table of Contents

Advertisement

Ambient temperature
Maximum humidity
Installation surface / water spray The device must be placed and leveled on
Installation clearances
Installation dimensions of the
water filter
User Manual WMF 1500 S
Appendix: Technical data
41 °F to 95 °F (5 °C to 35 °C)
(empty the water system in case of frost).
80 % relative humidity without condensation.
Do not use device outdoors.
a horizontal, sturdy, water-resistant, and
heatproof base.
The device must not be cleaned using a water
jet. The device must be installed where it is
protected against water spray. The device must
not be located on a surface that is sprayed or
cleaned with a water hose, steam jets, steam
cleaner, or similar devices.
For operating, service, and safety reasons the
machine should be installed with a clearance
from the building or non-WMF components of
not less than 1.97 in (50 mm) at the sides and
2.36 in (60 mm) at the back.
A minimum working space of 31.50 in (800 mm)
in front of the coffee machine is recommended.
Clearance of at least 7.87 in (200 mm) above
the product hopper is recommended. The height
of the installation surface above the floor is at
least 33.47 in (850 mm). If the coffee machine
connections are to be run downwards through
the counter, please make space for the lines,
which can reduce the usable space below the
machine.
See the User Manual for the water filter.
101

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents