Maintenance And Cleaning; Cleaning The Detergent Drawer; Cleaning The Loading Door And The Drum - Beko WTE 6531 X0 User Manual

5 Maintenance and cleaning

Service life of the product extends and frequently faced
problems decrease if cleaned at regular intervals.

5.1 Cleaning the detergent drawer

Clean the detergent drawer at regular intervals (every
4-5 washing cycles) as shown below in order to prevent
accumulation of powder detergent in time.
Lift the rear part of the siphon to remove it as illustrated.
C
If more than normal amount of water and
softener mixture starts to gather in the softener
compartment, clean the siphon.
2 Wash the detergent drawer and the siphon with
plenty of lukewarm water in a washbasin. Wear
protective gloves or use an appropriate brush to
avoid touching of the residues in the drawer with
your skin when cleaning.
3 After cleaning, replace the siphon back to its seating
and push its front section downwards to make sure
that the locking tab engages.

5.2 Cleaning the loading door and the drum

For products with drum cleaning programme, please
see Operating the product - Programmes.
For products without drum cleaning, follow the below
steps to clean the drum:
Select Additional Water or Extra Rinse auxiliary
functions. Use a Cottons programme without pre-wash.
Set the temperature to the level recommended on
the drum cleaning agent which can be provided
from authorized services. Apply this procedure
without any laundry in the product. Before starting
the programme, put 1 pouch of special drum cleaning
agent (if the special agent could not be supplied, put
max. 100 g of powder anti-limescale) into the main
wash detergent compartment (compartment no. "2").
If the anti-limescale is in tablet form, put only one
tablet into the main wash compartment no. "2" . Dry the
inside of the bellow with a clean piece of cloth after the
programme has come to an end.
C
Repeat Drum Cleaning process in every 2
months.
Use an anti-limescale suitable for the washing
machines.
After every washing check that no foreign substance is
left in the drum.
16 / EN
If the holes on the bellow shown in the figure is
blocked, open the holes using a toothpick.
C
Foreign metal substances will cause rust stains in
the drum. Clean the stains on the drum surface
by using cleaning agents for stainless steel. Never
use steel wool or wire wool.
A
WARNING:
Never use sponge or scrub
materials. These will damage the painted and
plastic surfaces.
Washing Machine / User's Manual