Auxiliary Function Selection; Starting The Programme; Child Lock - Beko WTE 6531 X0 User Manual

4.10 Auxiliary function selection

Select the required auxiliary functions before starting
the program. Furthermore, you may also select or
cancel auxiliary functions that are suitable to the
running programme without pressing the Start / Pause
button when the machine is operating. For this, the
machine must be in a step before the auxiliary function
you are going to select or cancel.
If the auxiliary function cannot be selected or canceled,
light of the relevant auxiliary function will blink 3 times
to warn the user.
C
Some functions cannot be selected together. For
example, Prewash and Quick Wash.
If a second auxiliary function conflicting with the
first one is selected before starting the machine,
the function selected first will be cancelled and
the second auxiliary function selection will remain
active. For example, if you want to select Quick
Wash after you have selected the Prewash,
Prewash will be cancelled and Quick Wash will
remain active.
Auxiliary function that is not compatible with the
program cannot be selected. (See "Programme and
consumption table")
Auxiliary Function buttons may vary according to the
model of the machine.
• Prewash
A Prewash is only worthwhile for heavily soiled
laundry. Not using the Prewash will save energy, water,
detergent and time.
C
Prewash without detergent is recommended for
tulle and curtains.
• Quick Wash
This function can be used in Cottons and Synthetics
programmes. It decreases the washing times for lightly
soiled laundries and also the number of rinsing steps.
C
When you select this function, load your machine
with half of the maximum laundry specified in the
programme table.
Delayed Start (In some models only)
With the Delayed Start function the startup of the
programme may be delayed up to 3, 6 or 9 hours.
Do not use liquid detergents when you set
C
Delayed Start! There is the risk of staining of the
clothes.
Open the loading door, place the laundry and put
detergent, etc. Select the washing programme,
temperature, spin speed and, if required, the auxiliary
functions. Set the desired time by pressing the Delayed
Start button. When the button is pressed once, 3 hours
delayed start is selected. When the same button is
pressed again, 6 hours delay is selected, and when it
is pressed for the third time, 9 hours delayed start is
selected. If you press the Delayed Start button once
again, Delayed Start function will be canceled. Press
Start / Pause button. Previous delayed start time light
turns off and next delayed start time light turns on
after every 3 hours. At the end of the countdown,
all delayed start lights will turn off and the selected
programme will start.
14 / EN
C
Additional laundry may be loaded during the
delayed start period.
Changing the Delayed Start period
Press Delayed Start button. Every time the button is
pressed, the period will change in 3-hour increments
and the light of the selected delayed start time will turn
on.
Canceling the Delayed Start function
If you want to cancel the delayed start countdown and
start the programme immediately:
Set the Delayed Start period to zero (all delayed
start period lights will turn off) or turn the Programme
Selection knob to any programme. Thus, Delayed Start
function will be canceled. The End/Cancel light flashes
continuously. Then, select the programme you want
to run again. Press Start / Pause button to start the
programme.

4.11 Starting the programme

Press Start / Pause button to start the programme.
Programme follow-up light showing the startup of the
programme will turn on.
C
If no programme is started or no key is pressed
within 1 minute during programme selection
process, the machine will switch to Pause mode
and the illumination level of the temperature,
speed and loading door indicator lights will
decrease. Other indicator lights and indicators will
turn off. Once the Programme Selection knob is
rotated or any button is pressed, indicator lights
and indicators will turn on again.

4.12 Child Lock

Use child lock function to prevent children from
tampering with the machine. Thus you can avoid any
changes in a running programme.
C
If the Programme Selection knob is turned when
the Child Lock is active, "Con" appears on the
display. The Child Lock does not allow any change
in the programmes and the selected temperature,
speed and auxiliary functions.
C
Even if another programme is selected with the
Programme Selection knob while the Child Lock
is active, previously selected programme will
continue running.
C
When the Child Lock is active and the machine
is running, you can switch the machine to Pause
mode without deactivating the Child Lock by
turning the Programme Selection knob to On / Off
position. When you turn the Programme Selection
knob afterwards, the programme will resu
To activate the Child Lock:
Press and hold 1st and 2nd Auxiliary Function buttons
for 3 seconds. The lights on the 1st and 2nd Auxiliary
Function buttons will flash while you keep the buttons
pressed for 3 seconds.
Washing Machine / User's Manual