Panasonic DP-C323 Operating Instructions Manual page 77

ATTENTION
Sheet Bypass Capacity
●
: 50 sheets (A4, 80 g/m
Capacity
● : 55-220 g/m
Weight
●
Size : A3-A5
●
Suitable media : Plain Paper, Thin Paper, Glossy Paper, Recycled Paper, Thick Paper, Coated Paper,
Index/Cover Paper, Coated/Cover Paper, Transparency, or Labels.
●
For more details about media type, see page 98.
3
Adjust the Side Guides.
Side Guides
●
Incorrect adjustment may cause the
paper to wrinkle, misfeed, or skew.
●
If the paper size is not detected, remove
the paper, and press the Reset key.
Then, load the paper again.
●
Ensure to change the media type
selection in the control panel when
changing the media loaded on the
trays. (Ex: Select "Transparency"
when Transparencies are loaded in
the Sheet Bypass)
If using other than Plain Paper, follow the steps
below to set for your desired type of printing media.
4
Press the Copy key if the machine is
set to other function mode.
5
Select "Paper/Output Tray".
2 )
2
6
Select "Change Size/Media".
7
Select "Change Type".
●
"Auto" can detect the standard sizes of paper
(A3, B4, A4, A4-R, A5, A5-R). When selecting
"Auto", ensure that standard sizes of paper
are loaded in the trays before printing.
8
Select a printing media type, and then
select "OK".
Select the best suited
media type (see
page 98) to match
the one loaded in
step 3 above.
●
Preprinted form is represented by a "
Select "OK".
".
77