Placing Originals (Facsimile/Internet Fax)
■ ■ ■ ■ ■ How to Place Originals
● ● ● ● ●
On the ADF
●
When scanning from the ADF, read the Notice for ADF. (See pages 20 and 56)
● ● ● ● ●
On the Platen
●
When scanning from the Platen Glass, read the Notice for Platen. (See pages 20, 21, 56, and 57)
● ● ● ● ●
Sending Non-Standard Size Originals
When transmitting non-standard size original(s), the
machine may perform Rotate Transmission
automatically and not transmit the portion of the
original that exceeds the standard size ("P" portion).
●
Rotation XMT is not carried out in
Monitor Dial Transmission.
●
When an oversized original is sent
to another machine, sometimes, it is
reduced in accordance with the other
party's recording paper size.
● ● ● ● ●
Scanning Area
Ex:
Original Width:
210 mm
56
Original Guides
Adjust the original's width.
8 mm
with Header Area
2.5 mm
Scanning
Width:
205 mm
2.5 mm
Scanning Direction
Set the originals up to the
Upper Limit Indicator.
Upper Limit Indicator
Upper Guide
Rotation XMT
A
P
The portion labeled "P"
that exceeds the
Scanning Direction
standard original size is
not sent.
Ex:
A3 size
5 mm
The original's border (grey area)
will be lost during scanning.
A4 size