The Preamplifier's Back Panel - VTL TL2.5 Owner's Manual

The Status LED indicates whether the preamplifier is in operating state or in muted
state. When the LED light is on, the preamplifier is in operating state. When the
LED light is on and flashing, the preamplifier is in mute state. The LED is off
when the system is powered off.
The Remote Receiver window allows the transmission of signal from the remote
hand-held unit to be received by the preamplifier. Keep this window clear from
any obstruction to allow maximum signal transmission.
The Power On/Off switch can be used to turn the preamplifier on and off. Press
the switch up to turn the preamplifier ON and press the switch down to turn the
unit OFF. The Status LED should be on and off respectively, according to the
setting of the Power On switch.

The Preamplifier's Back Panel

From the Preamplifier's back panel, you can access the input, output, ground and
power connectors, the main fuse holder, and the serial number of the unit.
Serial Number and
Main Fuse Model Number Tag
FUSE
TL 2.5 Stereo Preamplifier
1 A Slo Blo (120V)
For continuous protection
.4 A Slo Blo (240V) against fire hazard replace only
with fuse of same type and rating.
Manufactured by:
VTL Amplifiers Inc.
4774 Murrieta Street Suite 10
Chino, CA 91710 USA
(909) 627-5944
Preamplifier Outputs
AC Power Connector
TL2.5 Preamplifier Owner's Manual
VTL
Outputs Processor
A B In Out
To prevent electric shock do not remove cover. No user serviceable parts inside.
Refer servicing to qualified personnel. To prevent fire or shock do not expose this appliance to rain or moisture.
Tape Monitor
Processor Inputs
Inputs and Outputs
Tape
Video Tape
In Tuner CD
Line Stage Inputs
5
Inputs
Aux 1 Phono/Aux 2
Left
GND
Right
Phono Stage Phono Ground
Input Connector