Yamaha RX-V3900 Owner's Manual page 91

y
• To reset the name, select "RESET" and then press
9ENTER.
• To cancel the operation without change, select
"CANCEL" and then press 9ENTER.
■ Display Set (Display settings)
Front Panel Display (Front panel display setting)
Dimmer (Dimmer)
Use this feature to adjust the brightness of the front panel
display.
Control range: –4 to 0
Scroll (Front panel display message scroll)
Use this feature to set the front panel display message
scroll pattern.
Choice
Continue
Continuous mode.
Select this to display the operation status in the
front panel display in a continuous manner.
Once Scroll-once mode.
Select this to display the operation status in the
front panel display by the first 14 alphanumeric
characters after scrolling all characters once.
Short Message (Short message display)
Use this feature to activate or deactivate the short message
display displayed in the GUI screen in the main zone.
Choice
On Activates the short message display function.
Off Deactivates the short message display function.
Note
The short message display (except some status messages) does
not appear when the component video signals with 720p, 1080i
or 1080p resolutions are input.
Playback Screen (Playback screen display time)
Use this feature to set the playback screen display time.
Choice
Always Displays the menu unceasingly during an
operation.
10sec Turns off the menu 10 seconds after you
perform a certain operation.
30sec Turns off the menu 30 seconds after you
perform a certain operation.
y
This setting is applied to the GUI screen in the main zone and
OSD in Zone 2 or Zone 3.
Functions
Functions
Functions
Graphical user interface (GUI) menu
Position (GUI screen position)
Use this feature to adjust the vertical and horizontal
position of the GUI screen.
Control range: –5 (downward/left) to +5 (upward/right)
Button Moving direction of the GUI display
9 k
Up
9 n
Down
9 h
Right
9 l
Left
Wall Paper (Wall paper)
Use this feature to display the wall paper or gray
background in your video monitor when there is no video
signal being input.
Choice
None Does not display any background in your video
monitor.
Piano Displays a background image (the photograph
of a piano) in your monitor when there is no
video signal being input.
Horn Displays a background image (the photograph
of a horn) in your monitor when there is no
video signal being input.
Electric Guitar Displays a background image (the photograph
of an electric guitar) in your monitor when there
is no video signal being input.
Gray Display a gray background in your monitor
when there is no video signal being input.
■ iPod (iPod settings)
Standby Charge
(iPod charge on the standby mode)
Use this feature to select whether this unit charges the
battery of the stationed iPod or not when this unit is in the
standby mode.
Choice
Auto
Charges the battery of the stationed iPod when
this unit is turned on and in the standby mode.
Off Charges the battery of the stationed iPod only
when this unit is turned on.
Functions
Functions
87
En