Yamaha RX-V3900 Owner's Manual page 87

Notes
• If the aspect ratio of the input video source is other than 4:3, this
unit automatically ignores the setting of "Aspect".
• When "Aspect" is set to "Smart Zoom", the video images of the
edge of the video monitor are rather stretched.
Prog. Re-Processing (Progressive re-processing)
Use this feature to enable or disable the progressive re-
processing of the analog-to-HDMI video signals and/or
HDMI-to-HDMI video signals.
Choice
Off Disables the progressive re-processing of the
HDMI video signals.
On Enables the progressive re-processing of the
HDMI video signals.
Note
This setting is effective only for video signals of which
resolution is 480p(576p), 720p, or 1080p.
Setup (HDMI)
Use this feature to set the HDMI functions or check the
information about the video monitors connected to the
HDMI OUT jacks.
■ Standby Through (Standby through)
Mode (Standby through mode)
Use this feature whether this unit allows the HDMI signals
input at the HDMI IN jacks to pass thorough this unit
when this unit is in the standby mode. You can also
designate an HDMI IN jack and HDMI OUT jack(s) that
accept the signals when "Mode" is set to "Fix" and this
unit is in the standby mode.
Choice
Off
Disables the HDMI standby through feature.
HDMI signals do not pass through this unit if
this unit is in the standby mode.
Last HDMI signals pass through this unit (only from
the HDMI IN jack to the HDMI OUT jack(s)
used when this unit is set to the standby mode)
even when this unit is in the standby mode.
Fix HDMI signals pass through this unit (from the
HDMI IN jack specified in "Input" to the HDMI
OUT jack(s) specified in "Output") even when
this unit is in the standby mode.
Note
When "Mode" is set to "Last" or "Fix", the amount of power
consumption in the standby mode increases.
Functions
Functions
Graphical user interface (GUI) menu
Input (HDMI IN jack select)
Use this feature to select an HDMI IN jack that accepts
HDMI signals when this unit is in the standby mode.
Note
This setting is available only when "Mode" is set to "Fix".
Choice
HDMI IN1 (BD/HD DVD) jack
IN1
IN2 HDMI IN2 (DVD) jack
IN3 HDMI IN3 (CBL/SAT) jack
IN4 HDMI IN4 (DVR) jack
Output (HDMI OUT jack select)
Use this feature to select HDMI OUT jack(s) that output
HDMI signals when this unit is in the standby mode.
Note
This setting is available only when "Mode" is set to "Fix".
Choice
OUT1 + 2 HDMI OUT 1 and HDMI OUT 2 jacks
OUT1 HDMI OUT 1 jack
OUT2 HDMI OUT 2 jack
■ Audio Output (HDMI audio output)
Use this feature to select whether to play back HDMI
audio signals on this unit or on another HDMI component
connected to the HDMI OUT jacks on the rear panel of
this unit.
Choice
Amp
Outputs HDMI audio signals at the speakers
connected to this unit.
TV Outputs HDMI audio signals at the speakers of
the TV connected to this unit.
Amp + TV Outputs HDMI audio signals at the speakers
connected to this unit and speakers of the TV
connected to this unit.
y
If "Audio Output" is set to "TV" or "Amp + TV", available
audio signals vary depending on the specification of the
connected video monitor.
■ Control Monitor (Control monitor)
Use this feature to select the HDMI OUT jack at which
HDMI control signals are output.
Choice
HDMI OUT1
Outputs HDMI control signals at the HDMI
OUT 1 jack.
HDMI OUT2 Outputs HDMI control signals at the HDMI
OUT 2 jack.
HDMI IN jack
HDMI IN jack
Functions
Functions
83
En