Panasonic WV-CW864A Operating Instructions Manual page 28

** ZONE NUMBER 3/8 **
PAN/TILT
ZOOM/FOCUS
ZONE SCALE
SET DEL
RET
Moving the joystick in the L direction decreases
the zone frame, and moving it in the H direction
increases it. However, the aspect ratio is fixed at
3 to 4.
The privacy zone setting has been completed.
The menu returns to the ZONE NUMBER setting
menu. If DEL is selected, zone setting is
released and the ZONE NUMBER setting menu
appears.
3-6
• To complete new settings and repeat other set-
tings, move the cursor to SET and press the
CAM (SET) key. The ZONE NUMBER setting
menu reappears.
• To cancel new settings and return to the SPE-
CIAL 1 menu, move the cursor to DEL and press
the CAM (SET) key. New settings are not regis-
tered.
• To complete new settings and return to the SPE-
CIAL 1 menu, move the cursor to RET and press
the CAM (SET) key.
● Proportional Pan/Tilt (PROPO. P/T)
• Move the cursor to PROPO. P/T and select either
ON or OFF with the joystick.
Factory default setting: ON
** SPECIAL 1 **
PRIVACY ZONE
PROPO.P/T
AREA TITLE
PATROL
ALARM IN/OUT
CLEANING
EL-ZOOM
PRESET ALM
IMAGE HOLD
TILT ANGLE
RET
ON: Pan/tilt speed is in inverse proportion to the
zoom ratio as follows:
Zoom ratio
x1
x2
x4
x8
x15 or more
* The speed level values are approximate.
OFF: The speed is constant at the fastest level
regardless of the zoom ratio.
→PUSH SET
→PUSH SET
••••|••••
L H
OFF
ON
OFF
STOP
OFF
ON
OFF
OFF
0°
Speed level
7 (fastest)
5
3
1
0 (slowest)
● Area Title (AREA TITLE)
Up to 8 area titles can be added in specific positions.
1. Select ON (NESW), ON (USER) or OFF with the joy-
stick.
PRIVACY ZONE
PROPO.P/T
AREA TITLE
PATROL
ALARM IN/OUT
CLEANING
EL-ZOOM
PRESET ALM
IMAGE HOLD
TILT ANGLE
RET
ON (NESW): An area title is displayed for indicating
the camera direction: North (N), North-East (NE),
East (E), South-East (SE), South (S), South-West
(SW), West (W) and North-West (NW).
** DIRECTION(NESW) **
PAN/TILT
ZOOM/FOCUS
POSI
RET
ON (USER): A user customized area title appears in
a maximum of 16 characters.
OFF: Area tittle does not appear.
Factory default setting: OFF
2. Press the CAM (SET) key. A submenu appears
except when OFF is selected.
Settings for ON (NESW)
1. Move the cursor to PUSH SET for PAN/TILT, and
press the CAM (SET) key. PAN/TILT is highlighted
and "U TILT D/L PAN R" appears.
** DIRECTION(NESW) **
PAN/TILT
ZOOM/FOCUS
POSI
RET
2. Turn the camera north with the joystick, and press
the CAM (SET) key. The origin of the direction
(North) is set.
Note: Area titles are highlighted until the origin is
set.
-28-
** SPECIAL 1 **
OFF
ON
ON(USER)
STOP
OFF
ON
OFF
OFF
0°
→PUSH SET
→PUSH SET
+
N
→PUSH SET
→PUSH SET
U TILT D/L PAN R
+
N