Panasonic WV-NW470S Operating Instructions Manual page 8

!7 Set button (SET)
Validates the selection or opens a detailed menu.
!8 DIP switch
Specifies certain settings shown in the figure. The
default setting is marked with an asterisk *.
Note: The settings will be applied to the camera
only when DIP SW, not MENU, is selected in the
menu setup.
1 2
B/W B/W
level
ON High* AUTO1
OFF Low OFF*
ON
1 2
!9 Monitor output jack
Connects to the LCD monitor and other devices with
a 3.5 diam. 2-pole L-type plug for checking images.
@0 Dome cover
@1 Network port
Connects to a PC or a network via a hub with a
10BASE-T/100BASETX cable.
@2 Video output connector
Connects to the video input terminal of the monitor
or recorder.
3 4
Aperture Upside Sync
Down
Soft ON
Sharp* OFF* INT*
3 4 5
@0
WV-NW474SE
WV-NW470S
@3 Control connector
Connects respective devices. See Connections and
Specifications for details.
Day/night in: Optical sensor
Alarm in: Door switch
Alarm out: Buzzer
AUX out: Illumination
GND: Signal ground
@4 Power cable
5
Supplies power to the camera.
LL
@5 Camera mounting bracket
@6 Cable access hole
@7 Sideway cable exit
@1
@2
@3
@4
@4
-8-
@5
@6
@7