Stihl FS 510 C Instruction Manual page 19

Turn the wing screw
N
counterclockwise until the handle
support can be moved.
Lining up the handlebar
Move the handlebar to the required
N
position.
FS 510 C, FS 560 C
A
2
Position the handlebar (2) so that
N
distance A is about 7 in (17 cm).
Do not clamp the curved part of the
handlebar.
Closing the wing screw
Rotate the wing screw clockwise
N
until it becomes difficult to turn.
Tighten down the wing screw firmly.
N
Fold the grip of the wing screw down
N
so that it is flush.
Checking the Throttle Cable
After mounting the control handle,
N
check the throttle cable – see
chapter on "Adjusting the Throttle
Cable".
English
17