Quick Installation Guide (Qig); Installing Software And Driver; Installing Hardware - CyberView X5-MS User Manual

QUICK INSTALLATION GUIDE (QIG)

QUICK INSTALLATION GUIDE (QIG)

INSTALLING SOFTWARE AND DRIVER

for PC (Windows) User
WINDOWS SYSTEMS INSTALLATION DURING DRIVER INSTALLATION A
WARNING DIALOGUE BOX MAY APPEAR, IF THIS IS THE CASE PLEASE SELECT
"INSTALL THIS DRIVER ANYWAYS".
Notice:
1. In "Found New Hardware Wizard" window, select "Search automatically or
Browse computer for driver software. "
2. In "Completing the Found New Hardware Wizard" window, click
"Finish".
NOTE: Not all PC's will display the found new hardware window, some will install in
the background
Be sure to install the Application Software BEFORE installing the scanner driver
CyberView
You may install the scanner driver directly if you have already installed TWAIN com-
pliant application software in your computer. Mac users can use iPhoto for editing.
6 6
INSTALLING SOFTWARE AND DRIVER
Before Installing the Scanner Driver...
If you choose to use the provided application for image editing, install the applica-
tion software (ex: Adobe® Photoshop® Elements) by inserting the application CD
into the computer's CD/DVD drive. Follow the instructions that will be displayed in a
window that opens automatically.
Installing Scanner Driver
a. Insert driver CD into the computer CD/DVD drive and explore the contents.
b. Double click the "CyberView" icon to begin the installation process. Follow
the onscreen prompts to complete the installation process.
NOTE:
Make sure the scanner is NOT connected to the computer during the CyberView
driver installation.
c. Restart computer once the installation process is complete.

Installing Hardware

a. Connect the slide scanner to a power source.
1. Locate the power switch on the lower left side of the scanner. Make sure
the scanner is TURNED OFF.
2. Plug the AC adapter into an AC power source FIRST before plugging it
into the scanner.
3. Attach the USB cable to the computer using the standard USB adapter
end. Attach the USB adapter end of the cable to back panel of the scan-
ner.
b. Ensure the scanner does NOT have a slide magazine loaded, turn the scanner
ON. The calibration cycle on the scanner will start automatically and will take
several minutes to complete. A green light will fl ash while the calibration is in
progress. The slide transport arm will move in and out of the scanner. MAKE
SURE THERE IS ENOUGH ROOM IN FRONT OF THE SCANNER FOR THE SLIDE
TRANSPORT ARM TO EXTEND FULLY, DO NOT PUSH THE ARM BACK DURING
CALIBRATION.
7 7