Infrared Light; Positioning Of Security Camera - MAGINON SC-1 WR Instruction Manual

If the automatic channel changing function has
(O)
been activated, the receiver changes reception
channels at regular intervals so that alternating
images of all connected cameras are shown on
screen. Using the TIME SELECT (O) slide switch at
the back of the receiver, channel changing intervals
can be set. Available intervals are 5, 10, 20 and 30
seconds.

5.3. Infrared light

The security camera automatically adjusts to surrounding light conditions. An integrated
brightness sensor activates the infrared LED during dusk or darkness, which illuminates an area
of 59 ft. in front of the camera. Images can thus also be transmitted in dark conditions.

5.4. Positioning of security camera

Once images are transmitted, the security camera
can be positioned as required. Slightly loosen the
two wing nuts (N) on the stand. Maintaining some
(N)
tension facilitates alignment, as the camera is still
being held in place. You can now move the security
camera in nearly all directions until the best possi-
ble position has been found.
Once positioned correctly, retighten wing nuts on
stand.
Note:
• Have a second person at the display unit help you with the positioning.
13