Hyundai Seasall H380 Series Installation & Operation Manual page 5

ENGINE BREAK-IN
INITIAL BREAK-IN PROCEDURE
The first 20 hours of operation is the
engine break-in period. During this period,
it is important that the engine is operated
as outlined below.
• DO NOT operate engine at idle rpm for
extended periods of time during the first 10
hours.
• DO NOT operate at any one constant speed
for extended periods of time.
• DO NOT exceed 75% of full throttle during the
first 10 hours except during the engine initial
Break-In Procedure. During the next 10 hours,
occasional operating at full throttle (5 minutes
at a time maximum) is permissible.
• AVOID full throttle accelerations from neutral
position.
• DO NOT operate at all full throttle until engine
reaches normal operating temperature.
• FREQUENTLY CHECK engine oil level and
add oil if necessary.
!
!
DO NOT DRIVE IN SPACE WHERE THERE IS NO AIR CIRCULATION.
DO NOT DRIVE IN SPACE WHERE THERE IS NO AIR CIRCULATION.
EMISSION GAS IS HARMFUL.
EMISSION GAS IS HARMFUL.
INSTALLATION & OPERATION MANUAL
H380 Series
WARNING
WARNING
- 4 -