Manual Adjustment Of The Traction Power; Automatic Closing Function; Turn On; Turn Off - BOXER ZTGD-800 User Manual

PLEASE NOTE: When you set UP and DOWN limits, the "+" or "-" button can be
used for fine adjustment before you press the "P" button to confirm.
Manual adjustment of the traction power
UP:
Press the "P" button three times, until LED no. 6 flashes. You can now adjust
the traction strength to open the door. Press either "+" or "-" to increase or
reduce the traction strength. LED no. 8 is maximum strength. Then press the
"P" button to confirm the setting.
Press "P" again to complete programming.
DOWN:
Press the "P" button four times, until LED no. 1 flashes. You can now adjust the
traction strength to close the door. Press the "+" and "-" buttons to adjust the
setting. Press the "+" and "-" buttons. LED no. 8 is maximum and LED no. 1 is
minimum. Then press the "P" button to confirm the setting.
Press "P" again to complete programming.

Automatic closing function

TURN ON:

Press the "P" button five times, until LED no. 8 flashes. Press the "+" button to
activate the closing function. Then press the "P" button to save the setting.
Press "P" again to complete programming.

TURN OFF:

Press the "P" button five times, until LED no. 8 flashes. Press the "-" button to
de-activate the closing function. Then press the "P" button to save the setting.
Press "P" again to complete programming.
Please note: The automatic closing function is activated at the factory.