Grill; Control Panel And Doors - Rangemaster Arleston 90 Induction User's Manual & Installation Instructions

Table of Contents

Advertisement

Grill

Before you remove any of the grill parts for cleaning.
n
n
make sure that they are cool, or use oven gloves.
The grill pan and trivet should be washed in hot soapy water.
Alternatively, the grill pan can be washed in a dishwasher
After grilling meats or any foods that soil, leave to soak for
a few minutes in the sink immediately after use. Stubborn
particles may be removed from the grid by using a nylon
brush.

Control Panel and Doors

Avoid using any abrasive cleaners, including cream cleaners.
For best results, use a liquid detergent.
The same cleaner can also be used on the doors. Alternatively,
use a soft cloth wrung out in clean hot soapy water. You can
use the same method for cleaning the control panel and
knobs. After cleaning, polish with a dry cloth.
Glass Fronted Door Panels
DO NOT use harsh abrasive cleaners or sharp metal
n
n
scrapers to clean the oven door glass since they can
scratch the surface, which may result in shattering of
the glass.
The oven door front panels can be taken off so that the glass
panels can be cleaned. Move the cooker forward to gain
access to the sides, see section "Moving the Cooker".
Open the oven door slightly and remove the front panel
fixing screws from the door sides, two each side (Fig.5.2).
Carefully lift off the outer door panel. The inside face of the
glass panels can now be cleaned – take care not to disturb or
wet the door insulation.
Note: If the door is triple glazed then the inner two panels are
fixed together and should not be separated. After cleaning,
carefully refit the outer door panel and replace the side fixing
screws.
ArtNo.320-0002a Proplus oven door side screws
15
Fig.5.2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents