Before Using The Appliance For The First Time; Setting The Language; Setting The Clock; Setting The Water Hardness Range - NEFF C47C62N0 Instruction Manual

Before using the appliance for the first time

In this section you will find out which steps are required before
using the appliance for the first time:
Setting the clock and language
■

Setting the water hardness range

■
Starting the appliance for the first time
■
cleaning the accessories before use
■

Setting the language

Once the appliance has been connected to the power supply,
you must set the language for the text display.
Turn the temperature selector until the language you require
1.
appears on the text display.
Press and hold the info button for 3 seconds.
±
2.
Your setting is saved.
6SUDFKH ZlKOHQ
'HXWVFK
Changing the language
Your appliance must be switched off.
Press and hold the ± info button for 3 seconds.
1.
This takes you directly to the language selection screen.
Turn the temperature selector until the language you require
2.
appears on the text display.
Press and hold the ± info button for 3 seconds.
3.
Your setting is saved.

Setting the clock

Note: When you press the
3 seconds to set the clock using the rotary selector. Should this
have been insufficient for you, you can amend the clock time
later.
‹ : ‹‹ flashes in the clock display.
Briefly press the KJ clock function button to go to the
1.
setting mode.
The and symbols light up.
KJ 3
clock display.
Set the current time using the rotary selector.
2.
Your setting is accepted after 3 seconds.
KJ clock function button, you have
: appears in the
‚ƒ ‹‹
Changing the clock
To subsequently change the time, press the
button repeatedly until the
Change the time with the rotary selector.
Setting the water hardness range
Descale your appliance regularly. This is the only way to
prevent damage.
Your appliance automatically displays when it needs descaling.
It has been preset to water hardness range "medium". Change
the value if your water is softer or harder.
You can check the water hardness with the test strips supplied
or ask your water supplier.
If your water is very hard, we recommend that you use softened
water.
You can only dispense with descaling completely if you
exclusively use softened water. If this is the case, change the
water hardness to "softened".
You can change the water hardness range in the basic settings
when the appliance is switched off.
If necessary, turn the operating mode selector to the
1.
position and click in place to turn off the appliance.
Press and hold the info button until "Select language"
±
2.
appears in the text display.
Press the button repeatedly until "Water hardness 2-
±
3.
medium" appears.
Use the temperature selector to change the water hardness.
4.
Possible values:
softened
1-soft
2-medium
3-hard
4­very hard
Press and hold the ± info button for 3 seconds.
5.
The change is saved.
KJ clock function
and symbols light up again.
KJ 3
-
I
II
III
IV
Û
7