Childproof Lock; Changing The Basic Settings; Automatic Switch-Off - Siemens HB73GB550 Instruction Manual

Childproof lock

The oven has a childproof lock to prevent children switching it
on accidentally.
The oven will not react to any settings. The timer and clock can
also be set when the childproof lock has been activated.
Activating the childproof lock
The function selector must be on the zero setting.
Press and hold the h button for approx. four seconds.

Changing the basic settings

Your oven has various basic settings. These settings can be
customised to suit your requirements.
Basic setting
c0 Brightness of the display light-
ing**
c1 Signal duration upon completion
of a cooking time or timer period
c2 Clock display
c3 Waiting time until a setting is
adopted
c5 Telescopic shelves retrofitted
c6 Reset all values to the factory set-
tings
* Factory setting
** With red displays, the factory setting is selection 1, with white displays, it is selection 2.
The oven must be switched off.
Press and hold the 0 button for approx. 4 seconds.
1.
The current basic setting for the audible signal duration is
shown in the display, e.g. c1 2 for selection 2.
Use the @ or A button to change the basic setting.
2.

Automatic switch-off

If you do not change the settings on your appliance for several
hours, automatic switch-off is activated. The oven stops heating.
The point at which this occurs depends on the temperature or
grill setting that has been set.
Automatic switch-off is activated
A signal sounds. F8 appears in the display. The oven stops
heating.
Turn the function selector to the off position. The oven switches
off.
12
Selection 0 Selection 1
- night*
- approx. 10 seconds
only if in operation always*
- approx. 2 seconds
no* yes
no* yes
The @ symbol appears in the display. The childproof lock is
activated.
Deactivating the childproof lock
Press and hold the button for approx. four seconds.
h
The symbol goes out in the display. The childproof lock is
@
deactivated.
Selection 2
medium*
approx. 2 minutes*
-
approx. 5 seconds*
-
-
Confirm by pressing the
3.
The next basic setting appears in the display. You can scroll
through all levels with the
with the @ or A button.
To finish, press and hold the
4.
All basic settings are adopted.
You may change the basic settings at any time.
Overriding automatic switch-off
So that automatic switch-off is not activated when it is not
wanted, you can set a time period. The oven will heat until this
period has expired.
Selection 3
day
approx. 5 minutes
-
approx. 10 seconds
-
-
button.
0
button and change the setting
0
button for approx. 4 seconds.
0