Initial Operation - Bosch Advanced HedgeCut 36 Original Instructions Manual

OBJ_BUCH-948-006.book Page 16 Wednesday, August 31, 2016 9:37 AM
16 | English
Cordless hedge trimmer
Battery Charger
Article number
Charging current
Charging period (battery
discharged)
– 1.3 Ah
– 2.0 Ah
Allowable charging temperature
range
Weight according to EPTA-
Procedure 01:2014
Protection class
* depending on the battery pack being used
 Do not use 4.0 Ah battery with this power tool.
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-15.
Typically the A-weighted noise levels of the product are:
Sound pressure level 67 dB(A); sound power level 87 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-15:
2 2
a =2.5 m/s , K=1.5 m/s .
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
F 016 L81 406 | (31.8.16)
Mounting and Operation
Advanced
HedgeCut 36
Action
AL 3640 CV
Delivery Scope
Professional
Battery Charging
EU 2 607 225 099
UK 2 607 225 101 Inserting the battery
AU 2 607 225 103
Battery Charge Indicator
A 4.0
Starting
Stopping
(80 %) 100 %
Working Advice
min (15) 45
Removing the Battery
min (25) 45
Maintenance and Cleaning
Storage and Transport
°C 0– 45
Selecting Accessories
kg 1.0

Initial Operation

/ II
For Your Safety
 Warning: Switch off and remove battery from machine
before adjusting or cleaning.
 The blades continue to move for a fraction of a second
after the hedgecutter is switched off.
 Do not touch the moving blades.
Battery Charging
 Do not use other battery chargers. The supplied battery
charger is designed for the Lithium-Ion battery in your gar-
den product.
 Observe the mains voltage! The voltage of the power
supply must correspond with the data given on the name-
plate of the battery charger. Battery chargers marked with
230 V can also be operated with 220 V.
The battery is equipped with temperature monitoring that al-
lows charging only in the temperature range between 0 °C
and 45 °C. In this manner, a high battery service life is
achieved.
Note: The battery supplied is partially charged. To ensure full
capacity of the battery, completely charge the battery in the
battery charger before using your power tool for the first time.
The lithium-ion battery can be charged at any time without re-
ducing its service life. Interrupting the charging procedure
does not damage the battery.
The "Electronic Cell Protection (ECP)" protects the lithium-
ion battery against deep discharging. When the battery is run
down or discharged, the garden product is shut off by means
of a protective circuit: The garden product no longer oper-
ates.
been automatically switched off. The battery can be dam-
aged.
Figure Page
1 267
2 267
2 267
3 267
4 268
4 268
5 268
6 269
6 269
7 269
8 269
Do not continue to press the On/Off
switch after the garden product has
Bosch Power Tools