Operating Your Locomotive With Your Flyerchief Remote - Lionel FlyerChief Berkshire Locomotive and Tender Owner's Manual

The FlyerChief remote

Operating your locomotive with your FlyerChief remote

THROTTLE
Turn the throttle knob clockwise to go for-
ward and adjust the speed. Turn the throttle
knob counter-clockwise to go reverse and
adjust the speed. To stop the train, simply
return the throttle knob to the
center position.
BELL
The BELL button will
activate the bell sounds on
locomotives equipped with
this feature. Press the BELL
button to begin the sounds;
press the button again to
turn off the bell.
SPEED INDICATOR LIGHT
The red light will remain on during
normal operation. The light will begin to
flash when the locomotive is in motion,
and the flashing will vary with the
locomotive's speed.
WHISTLE
The WHISTLE button will activate
your locomotive's whistle. Press two
times within ONE second to
trigger the ElectroCoupler on the
tender.
ANNOUNCEMENTS
Press the center button for a variety of
announcements. See page 9 for more
information.
7
ON/OFF SWITCH
To conserve your batteries,
move the On/Off switch to
the Off position when you are
done operating your train.