Choosing Subjects to Focus On (Touch AF)
You can shoot after the camera focuses on your selected subject,
person's face, or location shown on the screen.
1
Choose a subject, a person's face,
or a location to focus on.
●
Touch the subject or person on the
screen.
●
When the AF method is set to [
an AF frame is displayed where you
touched.
●
When the AF method is set to [
[
] is displayed once a face is detected,
and focus is maintained even if the
subject moves. To cancel Touch AF, touch
[
].
2
Shoot.
●
Press the shutter button halfway. After
the camera focuses, [
green.
●
Press the shutter button all the way down
to shoot.
●
If the camera shoots when you touch the screen, choose MENU
(= 35) > [
2] tab > [Touch Shutter], and then set [Touch
Shutter] to [Disable].
●
Tracking may not be possible when subjects are too small or
move too rapidly, or when there is inadequate contrast between
subjects and the background.
Still Images
Movies
],
],
Shooting with the AF Lock
] is displayed in
The focus can be locked. After you lock the focus, the focal position will
not change even when you release your finger from the shutter button.
●
You can also switch faces and move the AF frame, by pressing
the [
] button.
-
To move the frame when AF method is set to [
pressing the [
] button, press the [
][
][ ][ ] buttons.
Press the [
] button to return to the shooting screen. To center
the frame again, on the shooting screen or frame adjustment
screen, hold down the [
] button for at least two seconds.
-
When the AF method is set to [
], press the [
button to display [Face Select : On]. A face frame [
displayed around the face detected as the main subject. Press
the [
] button again to switch the face frame [
detected face. Once you cycle through all detected faces, [Face
Select : Off] is displayed and Face Select is canceled.
●
To keep the frame in the same position (where you touched)
after shooting when [Touch Shutter] is set to [Enable] (= 46),
choose MENU (= 35) > [
2] tab > [Touch Shutter] > [AF
frame pos'n] > [Touch point].
Still Images
1
Lock the focus.
●
With the shutter button pressed halfway,
press the [ ] button.
●
The focus is now locked, and [
displayed.
●
To unlock the focus, release the shutter
button and press the [ ] button again. In
this case, [
] is no longer displayed.
2
Compose the shot and shoot.
Before Use
Basic Guide
], after
Advanced Guide
Camera Basics
]
Auto Mode /
] is
Hybrid Auto Mode
] to another
Other Shooting Modes
P Mode
Tv, Av, M, C1, and C2 Mode
Playback Mode
Wireless Features
Setting Menu
Movies
Accessories
Appendix
Index
] is
79