Using Auto Level
Auto leveling keeps movies straight.
●
Press the [
[
Auto level] on the [
press the [ ] button (= 35).
●
Choose [Enable], and press the [ ]
button again (= 35).
●
When you set [Digital IS] to [Enable] or [Enhanced] (= 86),
[
Auto level] is set to [Disable] and cannot be changed.
●
Once recording begins, the display area narrows, and subjects
are enlarged (= 86).
Still Images
Movies
Customize shooting functions on the [
follows.
] button, choose
For instructions on menu functions, see "Using the Menu Screen"
4] tab, and then
(= 35).
Preventing the AF-Assist Beam from Firing
You can deactivate the lamp that normally lights up to help you focus
when you press the shutter button halfway in low-light conditions.
Deactivating the Red-Eye Reduction Lamp
You can deactivate the red-eye reduction lamp that lights up to reduce
red-eye when the flash is used in low-light shots.
Customizing Camera Operation
] tab of the menu screen as
●
Press the [
[AF-assist beam (LED) firing] on the
[
3] tab, and then choose [Disable].
●
To restore the original setting, repeat this
process but choose [Enable].
1
Access the [Flash Control] screen.
●
Press the [
Control] on the [
the [ ] button (= 35).
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Still Images
Movies
Other Shooting Modes
P Mode
] button, choose
Tv, Av, M, C1, and C2 Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Still Images
Movies
Appendix
Index
] button, choose [Flash
5] tab, and then press
51