Trunking
LACP
Static Trunks (EtherChannel)
Configurable Trunk Hash algorithm
Spanning Tree
Multiple Spanning Tree (802.1 s)
Rapid Spanning Tree (802.1 w)
PVRST+
Fast Uplink Convergence
BPDU guard
Quality of Service
QoS 802.1p (priority queues)
DSCP remarking
Metering
Routing protocols
RIP v1/v2
OSPF
BGP
High availability
Layer 2 failover
HotLinks™
Virtual Router Redundancy support (VRRP)
Multicast
IGMP Snooping v1, v2, and v3 with 2 K IGMP groups
Protocol Independent Multicast (PIM Sparse Mode/Dense Mode)
Monitoring
Port mirroring
ACL-based mirroring
sFlow Version 5
Virtualization
VMready with VI API support
vNIC MIB support for SNMP (G8264 only)
Clients
IBM System Networking Element Manager
isCLI (Cisco-like)
Scriptable CLI
Browser-based client or Telnet
Standard protocols
IPv6
SNMP v1, v2c, and v3
RMON
Secondary NTP Support
DHCP Client
DHCP Relay
LLDP
128 K MAC Table
9 K Jumbo Frames
802.3X Flow Control
Upgrades
Upgrade firmware via serial or TFTP
Dual software images
Popular configurations
This section describes common configurations for the G8264.
Rack-optimized server aggregation 10-GbE attached rack servers
The RackSwitch G8264 is an ideal networking device for port aggregation, allowing the consolidation
IBM System Networking RackSwitch G8264/G8264T
12