Rinnai rhfe-551ft Installation Insrtuctions page 16

1 LOCATION
Do not install the unit in an unusually
dusty area.
Use flue guard if the terminal is easily
accessible to children.
Check local regulations.
Guards are available as an optional extra.
Floor must be level.
Do not use electrical extension cords to
connect unit to power supply.
Keep the power cord away from the flue.
770
(mm)
Flue manifold position.
Centre of hole for flue manifold can be
drilled anywhere within the shaded area.
(To avoid studs etc.)
FOR WEATHERBOARD WALLS DRILL
THROUGH CENTRE OF WEATHERBOARD
FROM OUTSIDE, THEN DRILL FROM
INSIDE THROUGH PLASTERBOARD.
1
When drilling the flue hole, check for
. water and gas pipes and electric cables
before starting to drill.
Use an 80 mm (8 cm) drill for hole through
wall.
Wall Mounting Bracket
Fit the wall mounting bracket to the wall.
Position of bracket is shown in the
diagram.
(use screws provided).
(mm)
-14-