Intended/Not intended use.
This product is designed to for use by a trained operator for cutting logs and felling
trees.
The chainsaw is used to;
o Saw trunks
o Square timbers
o Cutting branches
o Only material's form wood may be worked on.
Operators of this machine, MUST read this operators manual and be fully trained and
familiar with this chainsaw and think over all possible dangers.
Sufficient Personal Protective Equipment (PPE) is to be worn and according to the
operating instructions during use.
Damage or injuries resulting from mis-use are the responsibility of the operator. No
liability shall be taken by the supplier or manufacturer for mis-use.
Only use saw chains and guide bars recommended in the operating instructions for
the model of machine.
Any modifications to the machine will void the manufacturer's warranty.
This equipment is designed for use in the home garden.
OPERATION NOTES
Read these notes before you start working with the chainsaw,
and keep the notes for future reference.
Read the instructions carefully and familiarise yourself with all of
the control elements so that you are able to safely operate the
device. Always keep these operating instructions together with
the chainsaw
Risk of hearing defects. Under normal operating conditions this
device can expose the operator to a noise level of 80 dB (A) or
more.
Noise protection must be worn (SEE NOTE 1). Please observe
local regulations when operating this device.
Page 2
Rev 2