8. GENERAL MAINTENANCE
Disconnect the spark plug to prevent accidental starting.
1
2
3
8.1. Follow the instructions to carry out regular maintenance, pre-operating procedures and daily
maintenance routines.
8.2. Improper maintenance may result in serious damage to the machine.
8.3. Maintenance after each use.
8.3.1. Air Filter.
8.3.1.1.
by tapping a corner of the cleaner against a hard
surface.
8.3.1.2.
into halves and brush in petrol.
8.3.1.3.
inside.
8.3.1.4.
8.3.2. Chain oil port.
Dismount the guide bar and check the chain oil port
(1) for clogging.
Before cleaning, inspecting or repairing your chainsaw, make sure the engine
has stopped and is cool.
Air filter cover
Air filter
Spark plug
Dust on the cleaner surface can be removed
To clean dirt in the meshes, split the cleaner
When using compressed air, blow from the
To assemble the cleaner halves, press the rim until it clicks.
Page 17
Rev 2