TRENDnet User's Guide
Setting Up
There are two ways of setup: by pushing Wi-Fi Protected Setup (WPS)
button or web browser configuration.
WPS Connection
1. Plug in the TEW-737HRE to a power outlet nearby your wireless
router and switch the device on.
The LED indicator will start blinking in red, it means the system is booting
up. When the LED blinking in amber, the TEW-737HRE is ready for setup.
© Copyright 2015 TRENDnet. All Rights Reserved.
2. Press and release the WPS button on the repeater. The LED will
blinking in green, which means the TEW-737HRE has begun WPS
pairing.
3. Press and hold the WPS button on the router for 5 seconds to start
WPS pairing.
TEW-737HRE
7