TRENDnet User's Guide
Setting Up
There are two ways of setup: by pushing Wi-Fi Protected Setup (WPS)
button or web browser configuration.
WPS Connection
1. Plug in the TEW-822DRE to a power outlet nearby your wireless
router and switch the operation switch to Extender.
The power LED indicator will start blinking in blue, it means the system
is booting up. When the LED blinking in amber, the TEW-822DRE is ready
for setup.
© Copyright 2015 TRENDnet. All Rights Reserved.
2. Press and release the WPS button on the repeater. The LED will
blinking in green, which means the TEW-822DRE has begun WPS
pairing.
3. Press and hold the WPS button on the router for 5 seconds to start
WPS pairing.
TEW-822DRE
8