Ports, Controls And Indicator Leds - Siemens RUGGEDCOM RS900GP Installation Manual

Chapter 1
Introduction
• Exceeds NEMA TS-2 (traffic control equipment)
• -40 to 85°C (-40 to 185 °F) operating temperature (no fans)
• Conformal coated circuit boards (optional)
• Rugged powder coated aluminum enclosure
Power Supply
• 2 (redundant) 54VDC inputs (51-57VDC)
• Supports 8 30W PoE powered devices (minimum 260W total output)
• Supports power supply sharing
• Reverse polarity protection
• CSA/UL 60950-1 safety approved to 85 °C (185 °F)
Simple Plug and Play Operation
• Plug and play operation 802.3af/802.3at
• Automatic learning of up to 8192 MAC addresses
• Auto-negotiation on all 10/100BaseTX ports
• Auto-MDI/MDIX (crossover) on all 10/100BaseTX ports
• LED indicators for Link/Activity and Power
ROS® Advanced Network Management
• Enhanced Rapid Spanning Tree (eRSTPTM)
• Quality of Service (802.1p) for real-time traffic
• Port rate limiting: 128kbps to 8Mbps
• VLAN (802.1q) with double tagging
• IGMP Snooping for multicast filtering
• Port configuration, status, statistics, mirroring, security
• Loss of link management on fiber ports
• Web-based, Telnet, CLI management interfaces
• SNMP v2 and RMON
• Rich set of diagnostics with logging and alarms
Section 1.2

Ports, Controls and Indicator LEDs

The RS900GP features various ports, controls and indicator LEDs on the front panel for configuring and
troubleshooting the device.
2
RUGGEDCOM RS900GP
Installation Guide
Ports, Controls and Indicator LEDs