Graph/List Screen Group; On The Graphics Result Screen; On The List Result Screen - Agilent Technologies 4156b User Manual

Screen Organization

GRAPH/LIST Screen Group

GRAPH/LIST Screen Group
GRAPH/LIST screen group has the following screens:
Graphic Results: For displaying the measurement results graphically. You can
use lines or a marker on the graphics screen to analyze the
measurement results graphically.
List Results: For listing the measurement results.
To move into the GRAPH/LIST screen group, do one of the following:
• Press Graph/List front-panel key in the PAGE CONTROL key group (if present
screen is not GRAPHICS or LIST screen).
• Press Single, Repeat, or Append front-panel key (if present screen is not
GRAPHICS or LIST screen). Measurement is performed.
If the present screen is the GRAPHICS or LIST screen, you can toggle between
these screens by pressing the Graph/List front-panel key.

On the GRAPHICS result screen

In the primary softkey area of the GRAPHICS screen, the following softkeys are
available for performing the manual analysis functions:
For sweep measurements:
AXIS MARKER/ LINE
Y2 CURSOR
For sampling measurements:
AXIS MARKER/ LINE
Y2 CURSOR

On the LIST result screen

In the primary softkey area of the LIST screen, the following softkeys are available
for performing the manual analysis functions:
For sweep measurements:
AXIS MARKER
Y2
For sampling measurements:
AXIS MARKER
Y2
6-46
SCALING DISPLAY
SETUP
SCALING DISPLAY
SETUP
SPREAD RE-
SHEET SETUP
SPREAD RE-
SHEET SETUP
Agilent 4155B/4156B User's Guide Vol.2, Edition 5
SWEEP TIMING CONST
SETUP SETUP SETUP
SAMPLING STOP CONST
SETUP COND SETUP
SWEEP TIMING CONST
SETUP SETUP SETUP
SAMPLING STOP CONST
SETUP COND SETUP