La Crosse Technology WS6158-IT Instruction Manual page 13

transmitter is not waterproof and should not be placed anywhere it will become submerged in
water or be directly in the rain.
POSITIONING THE WEATHER WALL CLOCK:
There are two possible ways to mount the weather wall clock:
•
use of the foldout table stand, or
•
wall mounting
FOLDOUT TABLE STAND
The foldout table stand leg is located on the backside. Pull the stand out from
the bottom center edge of the Weather wall clock, below the battery
compartment. Once the foldout table stand is extended, place the weather wall
clock in an appropriate location.
WALL MOUNTING
1) Using a straightedge, horizontally space at 70 mm three screw
positions on a wall.
2) Install three mounting screws (not included) into a wall within
transmission range—leaving approximately 5mm extended from the
wall.
3) Place the Weather wall clock onto the screws, using the hanging holes
on the backside. Gently pull the weather wall clock down to lock the
screws into place.
Note: Always ensure that the Weather wall clock locks onto the screws
before releasing.
31