Advertisement
Quick Links
Motor Specifications and Ratings
1.0kW to 1.5kW
MD MA
Motor model
Model No.
Applicable driver
Frame symbol
Power supply capacity (kVA)
Rated output (W)
Rated torque (N . m)
Momentary Max. peak torque (N . m)
Rated current (Arms)
Max. current (Ao-p)
Regenerative brake
Without option
frequency
DV0P4284
(times/min)
Note)1
Rated rotational speed (r/min)
Max. rotational speed (r/min)
Moment of inertia
Without brake
of rotor
kg . m
-4
2
With brake
(x10
)
Recommended moment of inertia ratio
of the load and the rotor
Rotary encoder specifications
Resolution per single turn
Protective enclosure rating
Ambient temperature
Ambient humidity
Installation location
Environment
Altitude
Vibration resistance
Mass (kg), ( ) represents holding brake type
Brake specifications (This brake will be released when it is energized. Do not use this for braking the motor in motion.)
Static friction torque (N . m)
Engaging time (ms)
Releasing time (ms)
Note)4
Exciting current (DC) (A)
Releasing voltage
Exciting voltage
Permissible load
Radial load P-direction (N)
Thrust load A-direction (N)
During assembly
Thrust load B-direction (N)
Radial load P-direction (N)
During operation
Thrust load A-direction (N)
Thrust load B-direction (N)
For motor dimensions, refer to page A4-121, and for the diver, refer to pages A4-23, 49 and 74.
1 0 2 P 1
A4
MDDDT3530
series
A4F
MDDDT3530F
series
A4P
MDDDT3530P
series
Note)3
2500P/r
Incremental
10000
0 to 40˚C (free from freezing), Storage : –20 to +65˚C (Max.temperature guarantee 80˚C for 72 hours <Nomal temperature>)
Indoors (no direct sunlight), free from corrosive gas, inflammable gas, oil mist and dust
Low inertia, Medium Capacity
AC200V
1 0 2 S 1
Frame D
1.8
1000
4.8
14.4
5.6
24
No limit
No limit
2000
3000
6.17
6.79
10 times or less
17-bit
Absolute/
Incremental
131072
IP65 (except rotating portion of output shaft and lead wire end)
85%RH or lower (free from condensing)
1000m or lower
2
49m/ s
6.8 (8.7)
4.9
80
70 (200)
0.59
DC2V or more
DC 24 V ±10%
980
588
686
490
196
196
A4-95
MDMA
200V
1 5 2 P 1
MDDDT5540
MDDDT5540F
MDDDT5540P
2.3
1500
7.15
21.5
9.4
40
Note)2
Note)2
11.2
12.3
2500P/r
Incremental
10000
or less
8.5 (10.1)
13.7
100
50 (130)
0.79
1 5 2 S 1
17-bit
Absolute/
Incremental
131072
Advertisement
Related Manuals for Panasonic MDDDT3530
Summary of Contents for Panasonic MDDDT3530
- Page 1 Thrust load B-direction (N) For motor dimensions, refer to page A4-121, and for the diver, refer to pages A4-23, 49 and 74. Low inertia, Medium Capacity 1 0 2 P 1 1 0 2 S 1 MDDDT3530 MDDDT3530F MDDDT3530P 1000 14.4...
-
Page 2: Torque Characteristics
. When the motor speed exceeds the rated speed, regenerative brake frequency is in inverse proportion to the square of (running speed/rated speed). . Power supply voltage is AC230V (at 200V of the main voltage). Shaft If the supply voltage fluctuates, frequency is in inverse proportion to the square of (Running supply voltage/230) relative to the value in the table. - Page 3 Motor model series Model No. series Applicable driver series Frame symbol Power supply capacity (kVA) Rated output (W) Rated torque (N . m) Momentary Max. peak torque (N . m) Rated current (Arms) Max. current (Ao-p) Regenerative brake Without option...
- Page 4 . When the motor speed exceeds the rated speed, regenerative brake frequency is in inverse proportion to the square of (running speed/rated speed). . Power supply voltage is AC230V (at 200V of the main voltage). Shaft If the supply voltage fluctuates, frequency is in inverse proportion to the square of (Running supply voltage/230) relative to the value in the table.
- Page 5 Motor model series Model No. series Applicable driver series Frame symbol Power supply capacity (kVA) Rated output (W) Rated torque (N . m) Momentary Max. peak torque (N . m) Rated current (Arms) Max. current (Ao-p) Without option Regenerative brake...
- Page 6 . When the motor speed exceeds the rated speed, regenerative brake frequency is in inverse proportion to the square of (running speed/rated speed). . Power supply voltage is AC230V (at 200V of the main voltage). Shaft If the supply voltage fluctuates, frequency is in inverse proportion to the square of (Running supply voltage/230) relative to the value in the table.