Programming The Guest Mode; Measuring Weight Only - Tanita rd-901 InnerScan Dual Instruction Manual

Programming the Guest Mode

Guest mode allows you to program the platform for one-time use without using a personal data number.
Press the button to select "GUEST", then press the button.
Next, follow the steps below:
Set the age, gender (male/ female/ male athlete/ female athlete) and height.
Step onto the platform after "0.0lb" (or "0.00kg", 0.0stlb) is displayed.
The readings are displayed for 40 seconds.
Note:
The age range is from 7 to 99.
Who should use Athlete Mode?
Adults aged 18 years and over who either:
・Train or exercise for 12 hours or more a week and have been doing so for at least six months.
・Are body builders.
・Are professional athletes who want to monitor their progress at home.
・Have a lifetime history of fitness and who used to do more than 12 hours a week but do less now.
・Do not step off until "

Measuring Weight Only

Press the button. After 2 or 3 seconds, "0.0lb" (or "0.00kg", 0.0stlb) is displayed.
When "0.0lb" (or "0.00kg", 0.0stlb) is displayed, step onto the platform.
The body weight measurement is displayed, and the platform power turns
off automatically after approximately 20 seconds.
" disappears.
15