Tanita rd-901 InnerScan Dual Instruction Manual page 10

Setting and Storing Personal Data in the Memory
5. Measuring Your Body Composition
Check "0.0lb" (0.00kg, 0.0stlb) is shown on the display, then step on the platform.
Registered personal data and the measurement results are displayed in order, then the
power switches off automatically.
Note:
If you step onto the platform before 0.0lb is displayed, "Err,-OL" is displayed and the power
turns off. Set the personal information again.
Also, if you do not step onto the platform within 60 seconds of "0.0lb" (0.00kg, 0.0stlb) appearing,
the power turns off automatically. In this case, you need to set and store personal data again.
Note:
The platform needs to be connected to the iPhone in order to use the dedicated app.
Connect to the iPhone, and register the Body Composition Monitor as shown in the instructions on P.7.
If you change the birthday and/or gender, "CLr" is displayed on the platform.
Select "YES" using the
data enabling you to register new data.
If you select "no" using the
(existing data is left unchanged) and power turns off.
10
buttons and then press the
buttons and then press
button, to delete the existing personal
button, no new data is saved