Specifying The Personal Data Number For Measurement - Tanita rd-901 InnerScan Dual Instruction Manual

Specifying the Personal Data Number for Measurement

Follow these instructions if the platform continues to mis-recognize your number.
When the power is off, press the button to start measuring.
1.
Select your personal number using the buttons and then press the button.
2.
Step onto the platform when "0.0lb" (0.00kg, 0.0stlb) appears in the display.
The platform turns off automatically after displaying the measurement results.
Note:
・When the platform is connected to the iPhone and measurement data is saved in the platform,
lights in the personal data display screen and the measurement result display screen.
・If there are more than 6 sets of data stored, the number of saved sets of data is displayed after the personal data display lights.
・Up to 10 sets of measurement data can be stored in the platform.
・If you step onto the platform before "0.0lb" (or "0.00kg", 0.0stlb) is displayed, "Err,-OL" is displayed and the power turns off
during measurement.
14