Replacing The License Plate Light Bulb; Replacing An Auxiliary Light Bulb - Yamaha 2005 YZF-R6T Owner's Manual

Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the screws.
1. Screw
2. Remove the socket (together with
the bulb) by pulling it out.
1. License plate light bulb
2. License plate light unit
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU24310 3. Remove the defective bulb by pull-
ing it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with the
bulb) by pushing it in.
6. Install the license plate light unit by
installing the screws.
Replacing an auxiliary light
bulb
This model is equipped with two auxil-
iary lights. If an auxiliary light bulb burns
out, replace it as follows.
1. Remove the auxiliary light bulb
NOTE:
Remove the quick fastener by pushing
the center pin in with a screwdriver,
then pulling the fastener out.
1. Auxiliary light bulb cover
2. Quick fastener
2. Remove the socket (together with
6-36
cover by removing the quick fas-
tener.
the bulb) by pulling it out.
EAU24342
6