Yamaha 2005 YZF-R6T Owner's Manual page 61

1. Radiator cap
6. Remove the coolant drain bolt to
drain the cooling system.
7. Loosen the clamp screw, and then
disconnect the radiator hose to
drain the radiator.
1. Coolant drain bolt
2. Clamp screw
PERIODIC MAINTENANCE AND MINOR REPAIR
8. Remove the coolant reservoir cov-
er by removing the bolts.
1. Coolant reservoir cover
2. Bolt
9. Pull the fuel hoses upward to re-
move them from the guide.
1. Fuel tank breather hose
2. Fuel tank overflow hose
6-14
10. Remove the coolant reservoir by
removing the bolts.
11. Remove the coolant reservoir cap,
and then turn the coolant reservoir
upside down to empty it.
1. Coolant reservoir cap
2. Coolant reservoir
3. Bolt
12. After the coolant is completely
drained, thoroughly flush the cool-
ing system with clean tap water.
13. Install the coolant reservoir by in-
stalling the bolts.
14. Connect the radiator hose, and
then tighten the clamp screw.
15. Install the coolant drain bolt, and
then tighten it to the specified
torque.
6