Toyota 2014 Venza Owner's Manual page 54

1-2. Opening, closing and locking the doors
STEP 1
Vehicles with smart key system:
Close all the doors and switch the "ENGINE START STOP"
switch to IGNITION ON mode. (Perform
onds.)
Vehicles without smart key system:
Close all the doors and switch the engine switch to the "ON"
position. (Perform
STEP 2
Function
Shift position linked door lock-
ing function
Shift position linked door
unlocking function
Speed linked door locking func-
tion
Driver's door linked door unlock-
ing function
When the setting or canceling operation is complete, all doors are
locked and then unlocked.
54
VENZA_OM_OM73019U_(U)
STEP 2
within 20 seconds.)
Shift the shift lever to "P" or "N",
press and hold the driver's door
lock switch (
seconds then release.
The shift lever and switch posi-
tions corresponding
desired function to be set are
shown as follows.
Use the same procedure to can-
cel the function.
Shift lever
position
"P"
"N"
STEP 2 within 20 sec-
or
) for about 5
to the
Driver's door lock
switch position