Replacing The Headlight Bulb - Yamaha 2010 XV250Z Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT

Replacing the headlight bulb

This model is equipped with a quartz
bulb headlight. If the headlight bulb
burns out, replace it as follows.
NOTICE
Take care not to damage the follow-
ing parts:
G Headlight bulb
Do not touch the glass part of
the headlight bulb to keep it free
from oil, otherwise the transpar-
ency of the glass, the luminosity
of the bulb, and the bulb life will
be adversely affected. Thor-
oughly clean off any dirt and fin-
gerprints on the headlight bulb
7
using a cloth moistened with al-
cohol or thinner.
G Headlight lens
Do not affix any type of tinted
film or stickers to the headlight
lens.
Do not use a headlight bulb of a
wattage higher than specified.
EAU23783
ECA10650
1. Do not touch the glass part of the bulb.
1. Remove the headlight unit by re-
moving the screws.
1. Screw
2. Disconnect the headlight coupler,
and then remove the bulb cover.
7-31
1. Headlight coupler
2. Headlight bulb cover
3. Remove the headlight bulb holder
by turning it counterclockwise, and
then remove the burnt-out bulb.
1. Headlight bulb holder
4. Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.