Subaru 2000 Forester Owner's Manual page 87

celerate the vehicle. When the accelerator pedal is released, the ve-
hicle will return to and maintain the previous cruising speed.
B To temporarily cancel the cruise control
There are four ways to cancel the cruise control temporarily:
D Depress the brake pedal.
D Pull the control lever in the "CANCEL" direction.
D Depress the clutch pedal (manual transmission vehicles only).
D Shift the selector lever into the "N" position (automatic transmis-
sion vehicles only).
If the vehicle speed drops 9 mph (15 km/h) below the preset speed,
the preset speed will automatically cancelled.
To resume the cruise control after it has been temporarily canceled
and with vehicle speed of 25 mph (40 km/h) or more, push the control
lever upward in the "ACCEL, RESUME" direction to return to the origi-
nal cruising speed automatically.
B To turn off the cruise control
There are two ways to turn off the cruise control:
D Push the main switch again.
D Turn the ignition switch to the "ACC" position (but only when the
vehicle is completely stopped).
B To change the cruising speed
n To increase the speed
1. Push the control lever upward in the "ACCEL, RESUME" direction
and hold it until the vehicle reaches the desired speed.
The control lever can be used for increasing the cruising speed slight-
ly. Pressing the control lever upward in the "ACCEL, RESUME" direc-
tion increases the vehicle speed about 2 mph (3.2 km/h). Press the
control lever repeatedly until the desired speed is reached.
1. Depress the accelerator pedal to accelerate the vehicle to the de-
sired speed.
2. Push the control lever downward in the "SET, COAST" direction
Starting and operating
OR
– CONTINUED –
7-29