Subaru 2000 Forester Owner's Manual page 39

1. Deviation setting
HS6009AB
Depending on your location, the following adjustment is required due
to the difference between magnetic and geographic North. Refer to
the map shown above for the setting most appropriate for your loca-
tion.
1) Press the "ADJ" switch for 5 seconds or more.
2) Press the "YSET" or "B" to obtain the correct setting.
"YSET": "0" & "W", "5" & "E", "10" & "E", ...
"B": "10" & "W" → "15" & "W", ...
3) Press the "ADJ" switch again to save the setting and return the
system to the original display.
2. Direction setting
If the vehicle icon is blinking at any time, the following adjustment is
required to recalibrate the compass.
NOTE
This will happen due to the magnetic field interference as
described previously.
6-12