Recording Cds; Ager Ee Ne Atteruetaee - Panasonic RX-ES25 Operating Instructions Manual

To protect tapes against further recording
Tab for side "B" Tab for side "A"
To re-record
Normal position tape 5
Adhesive
tape
Recording =
TAPE/CD
RQT5183
| Tips on Recording |
A
The illustration shows how to remove the tabs to prevent recording.
To record on the tape again, cover as shown.
39m Erasing recordings
a) Insert the cassette with the side to be erased facing up.
(2) Press [B TAPE/CD] to switch to TAPE mode.
(3) Press [@/11].
Recording CDs
C Normal recording
Preparations:
e Inser a CD (= page 12).
e Wind on the leader tape.
i Press [4 DECK] to open the deck.
Load a cassette with the side for recording facing up and close
the deck by hand.
2 Press [E TAPE/CD] to switch to CD mode.
Each time you press the button:
TAPE — Cd
E] Press [@/I1] to start recording.
CD play and recording start at the same time.
The cassette stops when the CD finishes.
To stop recording
Press [B TAPE/CD].
[O] To pause recording
Press [@/ N].
Press again to resume recording.
To continue recording from another CD on the same cas-
sette
(1) Press [4 CD] and replace the CD.
(2) Press [@/ I).
To record selected tracks
Do step I, then program the tracks (mp page 14).
Press [@/11].
To skip unwanted tracks
C) Press [(®/1] to pause recording (the CD also pauses).
(2) Turn [TIME/PRESET TUNE -—CD SKIP ~~] so the next track you
want to record is displayed.
© Press [@/I1] to resume recording.