Table of Contents
Advertisement
After a fuse is replaced
n
If the lights do not turn on even after the fuse has been replaced, a bulb
l
may need replacement. (→P. 522)
If the replaced fuse blows again, have the vehicle inspected by your
l
Toyota dealer.
n
If there is an overload in the circuits
The fuses are designed to blow before the entire wiring harness is damaged.
CAUTION
n
To prevent system breakdowns and vehicle fire
Observe the following precautions.
Failing to do so may cause damage, and possibly a fire or injury.
Never use a fuse of a higher amperage rating than indicated, or use any
l
other object in place of a fuse.
Always use a genuine Toyota fuse or equivalent.
l
Never replace a fuse with a wire, even as a temporary fix.
This can cause extensive damage or even fire.
Do not modify the fuse or the fuse box.
l
NOTICE
Before replacing fuses
n
Have the cause of electrical overload determined and repaired by your Toy-
ota dealer as soon as possible.
4-3. Do-it-yourself maintenance
4
521
Advertisement
Chapters
Table of Contents
