Toyota 2009 Tundra Owner's Manual page 477

When the indicator on the HomeLink
start to flashing rapidly, release the buttons.
Test the operation of the HomeLink
programmed button. Check to see if the gate/device operates
correctly.
Repeat the steps above to program another device for each of
the remaining HomeLink
Programming other devices
n
To program other devices such as home security systems, home
door locks or lighting, contact your authorized Toyota dealer for
assistance.
Reprogramming a button
n
The individual HomeLink
reprogrammed. To reprogram a button, follow the programming
instructions.
Operating the HomeLink
Press the appropriate HomeLink
on the HomeLink
The HomeLink
if the button is held in.
Erasing the entire HomeLink
®
®
buttons cannot be erased but can be
®
®
transceiver should turn on.
®
continues to send a signal for a maximum of 20 seconds
®
3-7. Other interior features
®
compatible transceiver
®
by pressing the newly
buttons.
®
button. The HomeLink
memory (all three programs)
Press and hold down the 2 out-
side buttons for 20 seconds until
the indicator flashes.
If you sell your vehicle, be sure to
erase the programs stored in the
®
HomeLink
®
indicator
memory.
3
453