16. Retaining bracket for bobbin case
Check
1. Remove needle plate
2. Check if bobbin case stop (C) is aligned with the lower side of plate spring's alignment line (D) as
illustrated below.
Adjustment
1. Loosen screws (A and B),
2. Move the retaining bracket in either direction as illustrated, tighten screw (B) temporarily.
3. Check if bobbin case stop (C) is aligned with the lower side of plate spring's alignment line (D) as
illustrated below.
4. Tighten screw (A).
C
Singer Futura XL-400 , FQ-4
21