Removing Base , Front And Back Covers Cont - Singer Futura Quartet FQ-4 Service Manual

Removing base , front and back covers cont.

6. Remove the Screw (H) and washer (I) from the front cover.
I
7. Lay the machine down and remove the stitch balance cover,located on the free arms lower side
Usa Small Screw driver and push the rid located on the left side.
K
J
L
J
K
L
8. Us a small fl at screw driver and insert it from the back and at positions (J), (K) and (L)
and lift up the Front Cover to un-hook the taps on the front cover from the back cover.
Once its a gap between the front and back cover at position (J), (K) and (L) , the front cover can be remo-
ved.
9. Lift up the front cover a bit and disconnect the Multi cable from the Main PC Board.
To do this just pull the cable to the front to realese it from the PC board contact.
10. Presser foot lifter to its down position.
11. Remove the back cover.
36 Singer Futura XL-400 , FQ-4