Subaru 2011 Tribeca Owner's Manual page 146

Pairing Your Cell Phone
• Press the phone button, the blue L.E.D. will glow and "Call" will be displayed.
Listen to all options.
• Say "setup"; then listen to all options.
• Say "pairing options"; then listen to all options.
• Say "pair"; listen to the safety message.
• Say "continue."
• Say your personal four-digit pairing code, for example, "1234."
• Say "yes" to confirm the key.
• Put your phone into Bluetooth pairing mode and pair your phone to the system
using the pairing code you provided earlier.
• Say the name of the device.
• The system will let you know it is adding your phone to the system and it will
repeat the name of the device and ask you if it is correct; say "yes."
• When phone is successfully paired you will hear "Pairing complete."
Making a Call
• Press the phone button and listen to the prompts.
• Say "dial"; the system will ask for the number.
• Say the number you wish to call (do not pause during the area code, phone
exchange and the number).
• The system will repeat the number and ask you if it is correct; if correct say "yes."
• The system will then dial.
Receiving a Call
• When a call comes in you will be notified. The audio system will mute and a voice
prompt will inform you.
• Press the phone button to receive the call.
• To end the call press the phone button again.
793593_11a_Bluetooth_QRG_072310.indd 13
13
7/23/10 11:22 AM