Adjusting Display Conditions And Selecting Display Mode; Display Condition Adjustment; Adjusting Method - Subaru 2011 Tribeca Owner's Manual

Adjusting Display Conditions and Selecting Display Mode

In addition to the function that allows you to adjust the display color and other esthetic conditions, the Rear Seat Entertainment System
has a function that enables you to select the display mode (normal and wide screens) according to your preference. Use the following
methods for the adjustment and selection.

Display Condition Adjustment

You can adjust the display conditions with respect to the following items:
Brightness
Contrast
Tone (gradation)
Color (balance)
NOTE
Tone and color adjustments are not possible when a music CD is loaded in the player.
This setting is defaulted to medium within the adjustable range for each of the above adjustment items.

Adjusting method

* This figure shows the screen when a DVD vid-
eo disc or video CD is loaded in the player.
Press the remote control "DISPLAY" button. The display condition adjustment
screen will appear.
Highlight the desired adjustment item with the joystick, and then click either the "
or " " end of the joystick referring to the table below. (Clicking the "
in "–" direction adjustments and clicking the "
ments.)
Set each adjustment by selecting the "ENTER" switch on the screen or pressing the
remote control "ENTER" button.
" end results
" end results in "+" direction adjust-
"
51